DNS - Domain Name Service Konfigurirovanie DNS-klienta Ukazyvaem nash dns-server /etc/resolv.conf : search moshkow.pp.ru sosed.msk.ru nameserver 127.0.0.1 ;nameserver 194.8.2.1 Poryadok prosmotra informacii o imenah hostov zadaetsya v  /etc/host.conf : (Linux, BSD) order bind, hosts, nis multi on /etc/nsswitch.conf : (V Solaris, HP-UX) . . . hosts: files bind nis . . . Imya domena nashego hosta (Ne vsegda, no chasto) /etc/defaultdomain : moshkow.pp.ru Kak posmotret' zony DNS nslookup -ty=ns msk.ru zzz=msk.ru ; named-xfer -z $zzz -f filename ns.$zzz egrep '^[a-z]' filename | egrep -v A | grep NS| cut -f1 | sort -u| wc ili shodit' v RIPE: ftp://ftp.ripe.net/ripe/hostcount ¡ ftp://ftp.ripe.net/ripe/hostcount ftp://ftp.ripe.net/ripe/dbase ¡ ftp://ftp.ripe.net/ripe/dbase Rezul'tat na fevral' 1997: ru 1400 msk.ru 217 spb.ru 490 ras.ru 20 msu.su 19 rssi.ru 42  * Konfigurirovanie DNS-servera *  Dlya etogo nuzhno sozdat' nachal'nyj konfig-fajl named.boot i v kataloge /var/named slozhit' fajly s opisaniem nashih zon Primer zapolneniya fajlov Moya zona moshkow.pp.ru delegiruetsya iz pp.ru (a znachit - v RIPN) Revers-zona 173.233.193.in-addr.arpa delegiruetsya u hozyaina zony 233.193.in-addr.arpa (a znachit - v RIPN) /etc/named.boot ; config-fajl vashego DNS /var/named/moshkow.pp.ru ; opisanie vashej zony /var/named/193.233.173.0 ; opisanie revers-dns dlya toj zhe zony /var/named/root.cache ; nuzhno imet'. U vseh standartnyj /var/named/127.0.0.1 ; nuzhno imet'. U vseh standartnyj Esli vasha lokal'naya set' ne podklyuchena k Internet, vse ravno polezno imet' v nej DNS server dlya vnutrennih nuzhd. CHtob on ne porozhdal 1.5 minutnyh tajmautov pri obrashchenii k zavedomo "vneshnim" nedostizhimym hostam, prosto sdelajte fajl /var/named/root.cache pustym. Zavedennye vami dns zony nado zaregistrirovat' v "vyshestoyashchej" zone, chtob oni delegirovali ee vam. Revers-dns'nuyu zonu tozhe neobhodimo registrirovat' - delegirovat' vam ee obyazan tot, kto vydal vashi IP-adresa. /var/named/moshkow.pp.ru: ======================== @ IN SOA ns.moshkow.pp.ru. moshkow.ipsun.ras.ru. ( 1997093001 ; serial 28800 ;8 Refresh kak chasto secondary proveryaet obnovleniya 7200 ;2 Retry kak chasto secondary tykaetsya posle "neprohoda" 6048000;70d Expire skol'ko zapis' zhivet na secondary 864000);10d Minimum skol'ko zapis' zhivet v keshe IN NS ns.moshkow.pp.ru. IN NS nss.ras.ru. IN MX 10 mail.moshkow.pp.ru. IN MX 50 mail.ras.ru. ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ns IN A 193.233.173.111 nss IN A 193.233.172.8 proxy CNAME t111 mail CNAME t111 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; t01 IN A 193.233.173.1 t02 IN A 193.233.173.2 . . . t254 IN A 193.233.173.254 t255 IN A 193.233.173.255 /var/named/193.233.173.0 : ======================== @ IN SOA ns.moshkow.pp.ru. moshkow.ipsun.ras.ru. ( 1997093001 ; serial 28800 ; refresh ( 8 hours) 7200 ; retry ( 2 hours) 6048000 ; expire (70 days ) 864000 ) ; minimum (10 days ) IN NS ns.moshkow.pp.ru. IN NS nss.ras.ru. IN MX 10 mail.moshkow.pp.ru. IN MX 50 mail.ras.ru. ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; 1 IN PTR t01.moshkow.pp.ru. 2 IN PTR t02.moshkow.pp.ru. . . . 255 IN PTR t255.moshkow.pp.ru. /var/named/root.cache ----------------------------------------- ; ftp://ftp.rs.internic.net/domain/named.root ; . 3600000 IN NS A.ROOT-SERVERS.NET. A.ROOT-SERVERS.NET. 3600000 A 198.41.0.4 . 3600000 NS B.ROOT-SERVERS.NET. B.ROOT-SERVERS.NET. 3600000 A 128.9.0.107 . 3600000 NS C.ROOT-SERVERS.NET. C.ROOT-SERVERS.NET. 3600000 A 192.33.4.12 . 3600000 NS D.ROOT-SERVERS.NET. D.ROOT-SERVERS.NET. 3600000 A 128.8.10.90 . 3600000 NS E.ROOT-SERVERS.NET. E.ROOT-SERVERS.NET. 3600000 A 192.203.230.10 . 3600000 NS F.ROOT-SERVERS.NET. F.ROOT-SERVERS.NET. 3600000 A 192.5.5.241 . 3600000 NS G.ROOT-SERVERS.NET. G.ROOT-SERVERS.NET. 3600000 A 192.112.36.4 . 3600000 NS H.ROOT-SERVERS.NET. H.ROOT-SERVERS.NET. 3600000 A 128.63.2.53 . 3600000 NS I.ROOT-SERVERS.NET. I.ROOT-SERVERS.NET. 3600000 A 192.36.148.17 /var/named/127.0.0.0 -------------------------- @ IN SOA localhost. root.localhost. ( 1997071201 ; Serial 36000 ; Refresh 3600 ; Retry 3600000 ; Expire 36000 ) ; Minimun IN NS localhost. 1 IN PTR localhost. =========== I NAKONEC /etc/named.boot directory /var/named ; ¡ /var/named cache . root.cache ; ¡ root.cache primary 0.0.127.in-addr.arpa 127.0.0.0 ; ¡ 127.0.0.0 ; forwarders 193.124.148.65 193.124.23.4 primary moshkow.pp.ru moshkow.pp.ru ; ¡ moshkow.pp.ru primary 173.233.193.in-addr.arpa 193.233.173.0 ; ¡ 193.233.173.0 ; secondary moshkow.orc.ru 193.124.148.81 second/moshkow.orc.ru Dopolnitel'naya informaciya $INCLUDE /var/named/header @ $INCLUDE /var/named/fedfond-hosts-spisok @ Poyasneniya: Pervaya stroka soderzhit:  imya zony s obyazatel'noj tochkoj v konce predopredelennye polya IN i SOA imya servera, na kotorom soderzhitsya zavedomo pravil'naya informaciya o zone, s obyazatel'noj tochkoj na konce. Pri neobhodimosti razmeshcheniya vtorichnyh serverov my budem brat' informaciyu o zone imenno s etogo servera. pochtovyj adres otvetstvennogo za server, v kotorom znak @ zamenen na . a esli trebuetsya ispol'zovat' . v levoj chasti adresa, ona dolzhna byt' prefiksirovana dvumya znakami \ Imenno po etomu adresu budet otpravleno soobshchenie v sluchae uspeshnogo delegirovaniya zony. Adres v privedennom primere budet vyglyadet' kak andrei.arkhipov@elvis.ru otkryvayushchaya kruglaya skobka Na sleduyushchih 5 strokah opisyvayutsya vazhnye dlya zony parametry: Serial Opredelyaet poryadkovyj nomer redakcii fajla s opisaniem zony. |to chislo dolzhno izmenyat'sya tol'ko v storonu uvelicheniya i izmenyat'sya ono dolzhno pri kazhdom vnesenii izmeneniya v fajl opisaniya zony. Rekomenduemyj format: YYYYMMDDNN gde YYYY - god, MM - mesyac, DD - den', NN - poryadkovyj nomer vneseniya izmeneniya v ukazannyj den'. Refresh Kazhdye "refresh" sekund vtorichnye servera proveryayut osnovnoj na predmet uvelicheniya znacheniya "serial", i esli eto proizoshlo obnovlyayut u sebya zonu. Rekomenduemoe znachenie: 86400, chto sostavlyaet 24 chasa. Retry Esli osnovnoj server byl nedostupen, vtorichnyj budet proizvodit' povtornye popytki kazhdye "retry" sekund. Rekomenduemoe znachenie: 7200, chto sostavlyaet 2 chasa. Expire Esli v techenie "expire" sekund vtorichnyj server ne smog soedinit'sya s osnovnym i obnovit' informaciyu o zone, on schitaet sebya nesposobnym davat' otvety na zaprosy o zone. Rekomenduemoe znachenie: 2592000, chto sostavlyaet 30 sutok. Minimum TTL Znachenie po umolchaniyu dlya vremeni, v techenie kotorogo server derzhit zapis' v keshe. Rekomenduemoe znachenie: 345600, chto sostavlyaet 4 sutok. Dalee idet opisanie vseh serverov zony, prichem server ukazannyj v pervoj stroke (v zapisi SOA) obyazatel'no dolzhen prisutstvovat' v etom spiske, a esli neobhodimo razmeshchenie vtorichnyh serverov na mashih AO Relkom (ns.spb.su i/ili ns.ussr.eu.net), to i oni dolzhny prisutstvovat' v spiske, a takzhe v zayavke. V privedennom primere utverzhdaetsya, chto zona prisutstvuet na serverah ns.elvis.ru i ns2.elvis.ru i trebuetsya razmeshchenie vtorichnyh serverov na ns.spb.su i ns.ussr.eu.net Obratite vnimanie, chto vse imena serverov zakanchivayutsya tochkoj. ===================================== EOF =========================== [ Article crossposted from comp.protocols.tcp-ip.domains ] [ Author was Craig Richmond - division (craig@ecel.uwa.edu.au) ] [ Posted on 3 Aug 1993 10:53:51 GMT ] Setting up a basic DNS server for a domain Revision 1.1.1 Craig Richmond craig@ecel.uwa.edu.au 3rd August 1993 About this document I have written this file because it seems that the same questions seem to pop up time and time again and when I had to install DNS from scratch the first time, we found very little to help us. This document covers setting up a Domain Name Server with authority over your domain and using a few of the more useful but less well known (hopefully this document will take care of that) features of nslookup to get information about the DNS and to work out why yours isn't working. If you are using a Sun Workstation and you want to make NIS interact with the DNS, then this is not the FAQ for you (but it may well be when you try to set up the DNS). Mark J. McIntosh points out that it is included in the comp.sys.sun.admin FAQ and for the benefit of those of you who can't get that (it is posted in comp.sys.sun.admin, comp.sys.sun.misc, comp.unix.solaris, comp.answers and news.answers) I have included the relevant parts at the bottom in appendix C. Contents: Contents An Overview of the DNS Installing the DNS *The Boot File *The Cache File *The Forward Mapping File *The Reverse Mapping File Delegating authority for domains within your domain Troubleshooting your named *Named doesn't work! What is wrong? *I changed my named database and my local machine has noticed, but nobody else has the new information? *My local machine knows about all the name server information, but no other sites know about me? *My forward domain names work, but the backward names do not? How to get useful information from nslookup *Getting number to name mappings. *Finding where mail goes when a machine has no IP number. *Getting a list of machines in a domain from nslookup. Appendicies *Appendix A sample root.cache file *Appendix B Excerpt from RFC 1340 - Assigned Numbers - July 1992 *Appendix C Installing DNS on a Sun when running NIS An Overview of the DNS: The Domain Name System is the software that lets you have name to number mappings on your computers. The name decel.ecel.uwa.edu.au is the number 130.95.4.2 and vice versa. This is achieved through the DNS. The DNS is a heirarchy. There are a small number of root domain name servers that are responsible for tracking the top level domains and who is under them. The root domain servers between them know about all the people who have name servers that are authoritive for domains under the root. Being authoritive means that if a server is asked about something in that domain, it can say with no ambiguity whether or not a given piece of information is true. For example. We have domains x.z and y.z. There are by definition authoritive name servers for both of these domains and we shall assume that the name server in both of these cases is a machine called nic.x.z and nic.y.z but that really makes no difference. If someone asks nic.x.z whether there is a machine called a.x.z, then nic.x.z can authoritively say, yes or no because it is the authoritive name server for that domain. If someone asks nic.x.z whether there is a machine called a.y.z then nic.x.z asks nic.y.z whether such a machine exists (and caches this for future requests). It asks nic.y.z because nic.y.z is the authoritive name server for the domain y.z. The information about authoritive name servers is stored in the DNS itself and as long as you have a pointer to a name server who is more knowledgable than yourself then you are set. When a change is made, it propogates slowly out through the internet to eventually reach all machines. The following was supplied by Mark Andrews Mark.Andrews@syd.dms.csiro.au. If both the primary and all secondaries are up and talking when a zone update occurs and for the refresh period after the update the old data will live for max(refresh + mininum) average (refresh/2 +mininum) for the zone. New information will be available from all servers after refresh. So with a refresh of 3 hours and a minimum of a day, you can expect everything to be working a day after it is changed. If you have a longer minimum, it may take a couple of days before things return to normal. There is also a difference between a zone and a domain. The domain is the entire set of machines that are contained within an organisational domain name. For example, the domain uwa.edu.au contains all the machines at the University of Western Australia. A Zone is the area of the DNS for which a server is responsible. The University of Western Australia is a large organisation and trying to track all changes to machines at a central location would be difficult. The authoritive name server for the zone uwa.edu.au delegates the authority for the zone ecel.uwa.edu.au to decel.ecel.uwa.edu.au. Machine foo.ecel.uwa.edu.au is in the zone that decel is authoritive for. Machine bar.uwa.edu.au is in the zone that uniwa.uwa.edu.au is authoritive for. Installing the DNS: First I'll assume you already have a copy of the Domain Name Server software. It is probably called named or in.named depending on your flavour of unix. I never had to get a copy, but if anyone thinks that information should be here then by all means tell me and I'll put it in. If you intend on using the package called Bind, then you should be sure that you get version 4.9, which is the most recent version at this point in time. The Boot File: First step is to create the file named.boot. This describes to named (we'll dispense with the in.named. Take them to be the same) where the information that it requires can be found. This file is normally found in /etc/named.boot and I personally tend to leave it there because then I know where to find it. If you don't want to leave it there but place it in a directory with the rest of your named files, then there is usually an option on named to specify the location of the boot file. Your typical boot file will look like this if you are an unimportant leaf node and there are other name servers at your site. directory /etc/namedfiles cache . root.cache primary ecel.uwa.edu.au ecel.uwa.domain primary 0.0.127.in-addr.arpa 0.0.127.domain primary 4.95.130.in-addr.arpa 4.95.130.domain forwarders 130.95.128.1 Here is an alternative layout used by Christophe Wolfhugel He finds this easier because of the large number of domains he has. The structure is essentially the same, but the file names use the domain name rather than the IP subnet to describe the contents. directory /usr/local/etc/bind cache . p/root forwarders 134.214.100.1 192.93.2.4 ; ; Primary servers ; primary fr.net p/fr.net primary frmug.fr.net p/frmug.fr.net primary 127.in-addr.arpa p/127 ; ; Secondary servers ; secondary ensta.fr 147.250.1.1 s/ensta.fr secondary gatelink.fr.net 134.214.100.1 s/gatelink.fr.net secondary insa-lyon.fr 134.214.100.1 s/insa-lyon.fr secondary loesje.org 145.18.226.21 s/loesje.org secondary nl.loesje.org 145.18.226.21 s/nl.loesje.org secondary pcl.ac.uk 161.74.160.5 s/pcl.ac.uk secondary univ-lyon1.fr 134.214.100.1 s/univ-lyon1.fr secondary wmin.ac.uk 161.74.160.5 s/wmin.ac.uk secondary westminster.ac.uk 161.74.160.5 s/westminster.ac.uk ; ; ; Secondary for addresses ; secondary 74.161.in-addr.arpa 161.74.160.5 s/161.74 secondary 214.134.in-addr.arpa 134.214.100.1 s/134.214 secondary 250.147.in-addr.arpa 147.250.1.1 s/147.250 ; ; Classes C ; secondary 56.44.192.in-addr.arpa 147.250.1.1 s/192.44.56 secondary 57.44.192.in-addr.arpa 147.250.1.1 s/192.44.57 The lines in the named.boot file have the following meanings. directory This is the path that named will place in front of all file names referenced from here on. If no directory is specified, it looks for files relative to /etc. cache This is the information that named uses to get started. Named must know the IP number of some other name servers at least to get started. Information in the cache is treated differently depending on your version of named. Some versions of named use the information included in the cache permenantly and others retain but ignore the cache information once up and running. primary This is one of the domains for which this machine is authorative for. You put the entire domain name in. You need forwards and reverse lookups. The first value is the domain to append to every name included in that file. (There are some exceptions, but they will be explained later) The name at the end of the line is the name of the file (relative to /etc of the directory if you specified one). The filename can have slashes in it to refer to subdirectories so if you have a lot of domains you may want to split it up. BE VERY CAREFUL TO PUT THE NUMBERS BACK TO FRONT FOR THE REVERSE LOOK UP FILE. The example given above is for the subnet ecel.uwa.edu.au whose IP address is 130.95.4.*. The reverse name must be 4.95.130.in-addr.arpa. It must be backwards and it must end with .in-addr.arpa. If your reverse name lookups don't work, check this. If they still don't work, check this again. forwarders This is a list of IP numbers for forward requests for sites about which we are unsure. A good choice here is the name server which is authoritive for the zone above you. secondary (This line is not in the example, but is worth mentioning.) A secondary line indicates that you wish to be a secondary name server for this domain. You do not need to do this usually. All it does is help make the DNS more robust. You should have at least one secondary server for your site, but you do not need to be a secondary server for anyone else. You can by all means, but you don't need to be. If you want to be a secondary server for another domain, then place the line secondary gu.uwa.edu.au 130.95.100.3 130.95.128.1 in your named.boot. This will make your named try the servers on both of the machines specified to see if it can obtain the information about those domains. You can specify a number of IP addresses for the machines to query that probably depends on your machine. Your copy of named will upon startup go and query all the information it can get about the domain in question and remember it and act as though it were authoritive for that domain. Next you will want to start creating the data files that contain the name definitions. The cache file: You can get a copy of the cache file from FTP.RS.INTERNIC.NET. The current copy can be found in Appendix A. The Forward Mapping file: The file ecel.uwa.edu.au. will be used for the example with a couple of machines left in for the purpose of the exercise. Here is a copy of what the file looks like with explanations following. ; Authoritative data for ecel.uwa.edu.au ; @ IN SOA decel.ecel.uwa.edu.au. postmaster.ecel.uwa.edu.au. ( 93071200 ; Serial (yymmddxx) 10800 ; Refresh 3 hours 3600 ; Retry 1 hour 3600000 ; Expire 1000 hours 86400 ) ; Minimum 24 hours IN A 130.95.4.2 IN MX 100 decel IN MX 150 uniwa.uwa.edu.au. IN MX 200 relay1.uu.net. IN MX 200 relay2.uu.net. localhost IN A 127.0.0.1 decel IN A 130.95.4.2 IN HINFO SUN4/110 UNIX IN MX 100 decel IN MX 150 uniwa.uwa.edu.au. IN MX 200 relay1.uu.net IN MX 200 relay2.uu.net gopher IN CNAME decel.ecel.uwa.edu.au. accfin IN A 130.95.4.3 IN HINFO SUN4/110 UNIX IN MX 100 decel IN MX 150 uniwa.uwa.edu.au. IN MX 200 relay1.uu.net IN MX 200 relay2.uu.net chris-mac IN A 130.95.4.5 IN HINFO MAC-II MACOS The comment character is ';' so the first two lines are just comments indicating the contents of the file. All values from here on have IN in them. This indicates that the value is an InterNet record. There are a couple of other types, but all you need concern yourself with is internet ones. The SOA record is the Start Of Authority record. It contains the information that other nameservers will learn about this domain and how to treat the information they are given about it. The '@' as the first character in the line indicates that you wish to define things about the domain for which this file is responsible. The domain name is found in the named.boot file in the corresponding line to this filename. All information listed refers to the most recent machine/domain name so all records from the '@' until 'localhost' refer to the '@'. The SOA record has 5 magic numbers. First magic number is the serial number. If you change the file, change the serial number. If you don't, no other name servers will update their information. The old information will sit around for a very long time. Refresh is the time between refreshing information about the SOA (correct me if I am wrong). Retry is the frequency of retrying if an authorative server cannot be contacted. Expire is how long a secondary name server will keep information about a zone without successfully updating it or confirming that the data is up to date. This is to help the information withstand fairly lengthy downtimes of machines or connections in the network without having to recollect all the information. Minimum is the default time to live value handed out by a nameserver for all records in a zone without an explicit TTL value. This is how long the data will live after being handed out. The two pieces of information before the 5 magic numbers are the machine that is considered the origin of all of this information. Generally the machine that is running your named is a good one for here. The second is an email address for someone who can fix any problems that may occur with the DNS. Good ones here are postmaster, hostmaster or root. NOTE: You use dots and not '@' for the email address. eg root.decel.ecel.uwa.edu.au is correct and root@decel.ecel.uwa.edu.au is incorrect. We now have an address to map ecel.uwa.edu.au to. The address is 130.95.4.2 which happens to be decel, our main machine. If you try to find an IP number for the domain ecel.uwa.edu.au it will get you the machine decel.ecel.uwa.edu.au's IP number. This is a nicety which means that people who have non-MX record mailers can still mail fred@ecel.uwa.edu.au and don't have to find the name of a machine name under the domain to mail. Now we have a couple of MX records for the domain itself. The MX records specify where to send mail destined for the machine/domain that the MX record is for. In this case we would prefer if all mail for fred@ecel.uwa.edu.au is sent to decel.ecel.uwa.edu.au. If that does not work, we would like it to go to uniwa.uwa.edu.au because there are a number of machines that might have no idea how to get to us, but may be able to get to uniwa. And failing that, try the site relay1.uu.net. A small number indicates that this site should be tried first. The larget the number the further down the list of sites to try the site is. NOTE: Not all machines have mailers that pay attention to MX records. Some only pay attention to IP numbers, which is really stupid. All machines are required to have MX-capable Mail Transfer Agents (MTA) as there are many addresses that can only be reached via this means. There is an entry for localhost now. Note that this is somewhat of a kludge and should probably be handled far more elegantly. By placing localhost here, a machine comes into existance called localhost.ecel.uwa.edu.au. If you finger it, or telnet to it, you get your own machine, because the name lookup returns 127.0.0.1 which is the special case for your own machine. I have used a couple of different DNS packages. The old BSD one let you put things into the cache which would always work, but would not be exported to other nameservers. In the newer Sun one, they are left in the cache and are mostly ignored once named is up and running. This isn't a bad solution, its just not a good one. Decel is the main machine in our domain. It has the IP number 130.95.4.2 and that is what this next line shows. It also has a HINFO entry. HINFO is Host Info which is meant to be some sort of an indication of what the machine is and what it runs. The values are two white space seperated values. First being the hardware and second being the software. HINFO is not compulsory, its just nice to have sometimes. We also have some MX records so that mail destined for decel has some other avenues before it bounces back to the sender if undeliverable. It is a good idea to give all machines capable of handling mail an MX record because this can be cached on remote machines and will help to reduce the load on the network. gopher.ecel.uwa.edu.au is the gopher server in our division. Now because we are cheapskates and don't want to go and splurge on a seperate machine just for handling gopher requests we have made it a CNAME to our main machine. While it may seem pointless it does have one main advantage. When we discover that our placing terrabytes of popular quicktime movies on our gopher server (no we haven't and we don't intend to) causes an unbearable load on our main machine, we can quickly move the CNAME to point at a new machine by changing the name mentioned in the CNAME. Then the slime of the world can continue to get their essential movies with a minimal interuption to the network. Other good CNAMEs to maintain are things like ftp, mailhost, netfind, archie, whois, and even dns (though the most obvious use for this fails). It also makes it easier for people to find these services in your domain. We should probably start using WKS records for things like gopher and whois rather than making DNS names for them. The tools are not in wide circulation for this to work though. (Plus all those comments in many DNS implementation of "Not implemented" next to the WKS record) Finally we have a macintosh which belongs to my boss. All it needs is an IP number, and we have included the HINFO so that you can see that it is in fact a macII running a Mac System. To get the list of preferred values, you should get a copy of RFC 1340. It lists lots of useful information such as /etc/services values, ethernet manufacturer hardware addresses, HINFO defualts and many others. I will include the list as it stands at the moment, but if any RFC superceeds 1340, then it will have a more complete list. See Appendix B for that list. NOTE: If Chris had a very high profile and wanted his mac to appear like a fully connected unix machine as far as internet services were concerned, he could simply place an MX record such as IN MX 100 decel after his machine and any mail sent to chris@chris-mac.ecel.uwa.edu.au would be automatically rerouted to decel. The Reverse Mapping File The reverse name lookup is handled in a most bizarre fashion. Well it all makes sense, but it is not immediately obvious. All of the reverse name lookups are done by finding the PTR record associated with the name w.x.y.z.in-addr.arpa. So to find the name associated with the IP number 1.2.3.4, we look for information stored in the DNS under the name 4.3.2.1.in-addr.arpa. They are organised this way so that when you are allocated a B class subnet for example, you get all of the IP numbers in the domain 130.95. Now to turn that into a reverse name lookup domain, you have to invert the numbers or your registered domains will be spread all over the place. It is a mess and you need not understand the finer points of it all. All you need to know is that you put the reverse name lookup files back to front. Here is the sample reverse name lookup files to go with our example. 0.0.127.in-addr.arpa -- ; Reverse mapping of domain names 0.0.127.in-addr.arpa ; Nobody pays attention to this, it is only so 127.0.0.1 -> localhost. @ IN SOA decel.ecel.uwa.edu.au. postmaster.ecel.uwa.edu.au. ( 91061801 ; Serial (yymmddxx) 10800 ; Refresh 3 hours 3600 ; Retry 1 hour 3600000 ; Expire 1000 hours 86400 ) ; Minimum 24 hours ; 1 IN PTR localhost.ecel.uwa.edu.au. -- 4.95.130.in-addr.arpa -- ; reverse mapping of domain names 4.95.130.in-addr.arpa ; @ IN SOA decel.ecel.uwa.edu.au. postmaster.ecel.uwa.edu.au. ( 92050300 ; Serial (yymmddxx format) 10800 ; Refresh 3hHours 3600 ; Retry 1 hour 3600000 ; Expire 1000 hours 86400 ) ; Minimum 24 hours 2 IN PTR decel.ecel.uwa.edu.au. 3 IN PTR accfin.ecel.uwa.edu.au. 5 IN PTR chris-mac.ecel.uwa.edu.au. -- It is important to remember that you must have a second start of authority record for the reverse name lookups. Each reverse name lookup file must have its own SOA record. The reverse name lookup on the 127 domain is debatable seeing as there is likely to be only one number in the file and it is blatantly obvious what it is going to map to. The SOA details are the same as in the forward mapping. Each of the numbers listed down the left hand side indicates that the line contains information for that number of the subnet. Each of the subnets must be the more significant digits. eg the 130.95.4 of an IP number 130.95.4.2 is implicit for all numbers mentioned in the file. The PTR must point to a machine that can be found in the DNS. If the name is not in the DNS, some versions of named just bomb out at this point. Reverse name lookups are not compulsory, but nice to have. It means that when people log into machines, they get names indicating where they are logged in from. It makes it easier for you to spot things that are wrong and it is far less cryptic than having lots of numbers everywhere. Also if you do not have a name for your machine, some brain dead protocols such as talk will not allow you to connect. Since I had this I had one suggestion of an alternative way to do the localhost entry. I think it is a matter of personal opinion so I'll include it here in case anyone things that this is a more appropriate method. The following is courtesy of jep@convex.nl (JEP de Bie) The way I did it was: 1) add in /etc/named.boot: primary . localhost primary 127.in-addr.ARPA. IP127 (Craig: It has been suggested by Mark Andrews that this is a bad practice particularly if you have upgraded to Bind 4.9. You also run the risk of polluting the root name servers. This comes down to a battle of idealogy and practicality. Think twice before declaring yourself authorative for the root domain.) So I not only declare myself (falsely? - probably, but nobody is going to listen anyway most likely [CPR]:-) athorative in the 127.in-addr.ARPA domain but also in the . (root) domain. 2) the file localhost has: $ORIGIN . localhost IN A 127.0.0.1 3) and the file IP127: $ORIGIN 127.in-addr.ARPA. 1.0.0 IN PTR localhost. 4) and I have in my own domain file (convex.nl) the line: $ORIGIN convex.nl. localhost IN CNAME localhost. The advantage (elegancy?) is that a query (A) of localhost. gives the reverse of the query of 1.0.0.127.in-addr.ARPA. And it also shows that localhost.convex.nl is only a nickname to something more absolute. (While the notion of localhost is of course relative :-)). And I also think there is a subtle difference between the lines primary 127.in-addr.ARPA. IP127 and primary 0.0.127.in-addr.ARPA. 4.95.130.domain ============= JEP de Bie jep@convex.nl ============= Delegating authority for domains within your domain: When you start having a very big domain that can be broken into logical and seperate entities that can look after their own DNS information, you will probably want to do this. Maintain a central area for the things that everyone needs to see and delegate the authority for the other parts of the organisation so that they can manage themselves. Another essential piece of information is that every domain that exists must have it NS records associated with it. These NS records denote the name servers that are queried for information about that zone. For your zone to be recognised by the outside world, the server responsible for the zone above you must have created a NS record for your machine in your domain. For example, putting the computer club onto the network and giving them control over their own part of the domain space we have the following. The machine authorative for gu.uwa.edu.au is mackerel and the machine authorative for ucc.gu.uwa.edu.au is marlin. in mackerel's data for gu.uwa.edu.au we have the following @ IN SOA ... IN A 130.95.100.3 IN MX mackerel.gu.uwa.edu.au. IN MX uniwa.uwa.edu.au. marlin IN A 130.95.100.4 ucc IN NS marlin.gu.uwa.edu.au. IN NS mackerel.gu.uwa.edu.au. Marlin is also given an IP in our domain as a convenience. If they blow up their name serving there is less that can go wrong because people can still see that machine which is a start. You could place "marlin.ucc" in the first column and leave the machine totally inside the ucc domain as well. The second NS line is because mackerel will be acting as secondary name server for the ucc.gu domain. Do not include this line if you are not authorative for the information included in the sub-domain. Troubleshooting your named: Named doesn't work! What is wrong? Step 1: Run nslookup and see what nameserver it tries to connect you to. If nslookup connects you to the wrong nameserver, create a /etc/resolv.conf file that points your machine at the correct nameserver. If there is no resolv.conf file, the the resolver uses the nameserver on the local machine. Step 2: Make sure that named is actually running. Step 3: Restart named and see if you get any error messages on the console and in also check /usr/adm/messages. Step 4: If named is running, nslookup connects to the appropriate nameserver and nslookup can answer simple questions, but other programs such as 'ping' do not work with names, then you need to install resolv+ most likely. I changed my named database and my local machine has noticed, but nobody else has the new information? Change the serial number in the SOA for any domains that you modified and restart named. Wait an hour and check again. The information propogates out. It won't change immediately. My local machine knows about all the name server information, but no other sites know about me? Find an upstream nameserver (one that has an SOA for something in your domain) and ask them to be a secondary name server for you. eg if you are ecel.uwa.edu.au, ask someone who has an SOA for the domain uwa.edu.au. Get NS records (and glue) added to your parent zone for your zone. This is called delegating. It should be done formally like this or you will get inconsistant answers out of the DNS. ALL NAMSERVERS FOR YOUR ZONE SHOULD BE LISTED IN THIS MANNER. My forward domain names work, but the backward names do not? Make sure the numbers are back to front and have the in-addr.arpa on the end. Make sure you reverse zone is registered. For Class C nets this can be done by mailing to hostmaster@internic.net. For class A & B nets make sure that you are registeres with the primary for your net and that the net itself is registered with hostmaster@internic.net. How to get useful information from nslookup: Nslookup is a very useful program but I'm sure there are less than 20 people worldwide who know how to use it to its full usefulness. I'm most certainly not one of them. If you don't like using nslookup, there is at least one other program called dig, that has most/all(?) of the functionality of nslookup and is a hell of a lot easier to use. I won't go into dig much here except to say that it is a lot easier to get this information out of. I won't bother because nslookup ships with almost all machines that come with network software. To run nslookup, you usually just type nslookup. It will tell you the server it connects to. You can specify a different server if you want. This is useful when you want to tell if your named information is consistent with other servers. Getting name to number mappings. Type the name of the machine. Typing 'decel' is enough if the machine is local. (Once you have run nslookup successfully) > decel Server: ecel.uwa.edu.au Address: 130.95.4.2 Name: decel.ecel.uwa.edu.au Address: 130.95.4.2 > One curious quirk of some name resolvers is that if you type a machine name, they will try a number of permutations. For example if my machine is in the domain ecel.uwa.edu.au and I try to find a machine called fred, the resolver will try the following. fred.ecel.uwa.edu.au. fred.uwa.edu.au. fred.edu.au. fred.au. fred. This can be useful, but more often than not, you would simply prefer a good way to make aliases for machines that are commonly referenced. If you are running resolv+, you should just be able to put common machines into the host file. DIG: dig Getting number to name mappings. Nslookup defaults to finding you the Address of the name specified. For reverse lookups you already have the address and you want to find the name that goes with it. If you read and understood the bit above where it describes how to create the number to name mapping file, you would guess that you need to find the PTR record instead of the A record. So you do the following. > set type=ptr > 2.4.95.130.in-addr.arpa Server: decel.ecel.uwa.edu.au Address: 130.95.4.2 2.4.95.130.in-addr.arpa host name = decel.ecel.uwa.edu.au > nslookup tells you that the ptr for the machine name 2.4.95.130.in-addr.arpa points to the host decel.ecel.uwa.edu.au. DIG: dig -x Finding where mail goes when a machine has no IP number. When a machine is not IP connected, it needs to specify to the world, where to send the mail so that it can dial up and collect it every now and then. This is accomplished by setting up an MX record for the site and not giving it an IP number. To get the information out of nslookup as to where the mail goes, do the following. > set type=mx > dialix.oz.au Server: decel.ecel.uwa.oz.au Address: 130.95.4.2 Non-authoritative answer: dialix.oz.au preference = 100, mail exchanger = uniwa.uwa.OZ.AU dialix.oz.au preference = 200, mail exchanger = munnari.OZ.AU Authoritative answers can be found from: uniwa.uwa.OZ.AU inet address = 130.95.128.1 munnari.OZ.AU inet address = 128.250.1.21 munnari.OZ.AU inet address = 192.43.207.1 mulga.cs.mu.OZ.AU inet address = 128.250.35.21 mulga.cs.mu.OZ.AU inet address = 192.43.207.2 dmssyd.syd.dms.CSIRO.AU inet address = 130.155.16.1 ns.UU.NET inet address = 137.39.1.3 You tell nslookup that you want to search for mx records and then you give it the name of the machine. It tells you the preference for the mail (small means more preferable), and who the mail should be sent to. It also includes sites that are authorative (have this name in their named database files) for this MX record. There are multiple sites as a backup. As can be seen, our local public internet access company dialix would like all of their mail to be sent to uniwa, where they collect it from. If uniwa is not up, send it to munnari and munnari will get it to uniwa eventually. NOTE: For historical reasons